Windows 95/98

Sound Problems

You need to go into the Advanced Options Menu. Under Audio: turn on Use3dHardware to enable 3D sound card support. You must then disable the Aureal's ""A3D Splash Screen"" in the Aureal configuration utility. If this is not disabled, Klingon Honor Guard may be unable to go into full-screen mode because of the splash screen interference. Information updated 11/17/98 The Klingon Honor Guard patch version 1.1 is also addressing this sound card problem. If you don't have this version, please download it now. Click on the link(s) below to obtain the appropriate update file: Get the KHG patch version 1.1 (approx 2.3 MB) Read the release Notes for Klingon Honor Guard version 1.1

If your computer is hooked up to a Dolby SurroundSound receiver, you should go into ""Advanced Options"" and turn on the ""UseSurround"" to take advantage of 360-degree Dolby sound panning, which rocks.

This problem has been resolved in the patch version 1.1 please download the file from our ftp site (ftp:ftp.microprose.com) or click on the link below to get it now. Click on the link(s) below to obtain the appropriate update file: Get the KHG patch version 1.1 (approx 2.3 MB) Read the release Notes for Klingon Honor Guard version 1.1

Because of the way operating systems work, many Windows NT machines experience significant latency in their sound effects. There is no solution to this problem at this time.

You need to upgrade to the latest version of Aureal's A3D drivers.

The Galaxy audio driver listed is not a hardware driver for your sound card but a software driver for the Galaxy audio system that Klingon Honor Guard uses. You do not need to select your own card's driver.

Troubleshooting

Most ""mutual exclusion"" errors are a result or wrong drivers for your 3D card. A visit to the 3dfx web site to get the latest reference drivers will solve those problems. If you replaced a previous voodoo 1 video card with a newer card (most likely voodoo2): You need to contact the Hardware manufacturer of the previous card for assistance in removing any leftover invalid system files and registry entries still residing on your system. If you don't have the latest version of Klingon Honor Guard, please download it from the link below. Disable direct support from Voodoo2 settings 1)Go to display properties 2)Click the 3dfx Voodoo2 tab 3)Click the advanced tab 4)Click the disable voodoo2 Direct 3d support 5)Click ok and apply and the game should run with full acceleration Note If you have an Obsidian 2 you may not have this option in your display Settings for Glide. You can get these options by downloading the reference 'Glide' drivers from the 3Dfx site. Click on the link(s) below to obtain the appropriate update file: VISIT the 3Dfx site for the latest reference drivers Get the KHG patch version 1.1 (approx 2.3 MB) Read the release Notes for Klingon Honor Guard version 1.1

Hints and Tips

To play an old saved game after you install the update patch: Go to the Klingon game folder on your hard disk. Open the Save folder and double click on the saved game you want to play. When it asks you what program to use to open the file choose KHG.EXE. Then once the game is running re-save it and it will then show up in the listing of saved games.

General Information

Here's a few cheat codes from the designers: PlayerCam: 3rd person player tracking camera. Always keeps the player in view. OverheadCam: Overhead player camera (sort of like the old Gauntlet arcade game). BehindCam: Camera that follows the player - Tomb Raider style. SwitchView: Toggles between all of the above views. SpawnWingman: Spawns 2 Wingmen that attack enemies.

To add a weapon to the game, pull down the consul window by typing ~ during the game, and type ""summon klingons.xxxxxxxxx"" where xxxxxxx is the item name. (do not include the quotes and do include the period between klingons and item name) Each one summons the respective item. summon klingons.batleth summon klingons.daktagh summon klingons.disruptorpistol summon klingons.disruptorrifle summon klingons.assaultdisruptor summon klingons.spinclaw summon klingons.grenadelauncher summon klingons.rocketlauncher summon klingons.sithhar summon klingons.particlecannon summon klingons.combatarmor summon klingons.combatgoggles summon klingons.vacsuit summon klingons.medikit summon klingons.dilithiumcellcase You can also type ""allammo"" at the consul and get full ammo for all your guns. Here are some other summons items too. summon klingons.communicator summon klingons.stealthsuit summon klingons.camera1 - summons a static camera summon klingons.camera2 - summons a moveable camera summon klingons.camera3 - summons a sniper camera summon klingons.gagh - A bowl of Gagh summon klingons.bloodwine summon klingons.genetickey summon klingons.retinalkey summon klingons.passcardkey summon klingons.palmkey summon klingons.cipherkey summon klingons.targ - Get a free Targ to hunt.

We do not recommend that you play at any camera view but the default. However we have included three other camera views that can be used to observe game action: Behind view - third person style camera view Overhead view - like the name says - overhead view of your character. Player Cam - Camera that is facing the player and follows them wherever they go. There are two ways to switch these views: Type SwitchViewTo # at the console. The # 0-3 will switch camera position as follows: 0 - Normal 1 - Behind view 2 - Overhead view 3 - Player Cam You can also type the following at the console: Behindcam for Behind View Overheadcam for Overhead View Playercam for Player Cam View To toggle back to normal type the command again. Case: More info about performance tips and console commands

To play an old saved game after you install the update patch: Go to the Klingon game folder on your hard disk. Open the Save folder and double click on the saved game you want to play. When it asks you what program to use to open the file choose KHG.EXE. Then once the game is running re-save it and it will then show up in the listing of saved games.

Install the visual basic runtime libraries. We do not support the editor however this is a common problem with the unreal editor. Since they have a fix for it we will offer the same fix. The file should be on the Install CD in the Extras folder / Drivers folder / its called vbrun50.zip.

If a player is wearing magboots he will have to deactivate them to enter the shuttlecraft.

Klingon Honor guard work better using a keypad or the keyboard. If you'd rather use a Joystick, you need to turn the option ON from the advanced settings: Go to the advanced options menu then expand the Display selection. Locate the 'Use Joystick' True/False drop box and choose TRUE Unfortunately this default setting was not changed from the original release of Unreal. Here's also some useful information on how to make your character turn instead of strafe: This is explained in the UNREAL troubleshooting guide as follows: Joystick: If you want the left-right controls to make you rotate (rather than strafe), go to Options / Advanced Options / Advanced / Raw Key Bindings, scroll down to ""JoyX"", and change the text there from ""Axis aStrafe speed=2"" to ""Axis aTurn speed=2"".

Vortex on elevators: A vortex will not pull players into it when you activate it on an elevator, you must use the vortex outside of the elevators.

This has been limited in the game since the writing of the manual. There is now only the default bob.

Installation

Identify conflicts via Safe mode Try starting Klingon Honor Guard via the ""Klingon Honor Guard Safe Mode"" icon available in the Start menu : (Start/Programs/Microprose/Klingon Honor Guard/KHG Safe Mode). This shortcut will run Klingon Honor Guard with sound, DirectDraw, and 3D hardware support disabled. This will allow you to get the game running and then you can modify the Advanced Options settings to find the one that is causing problems, then run Klingon Honor Guard again.

Low disk space on drive C: You need to free up more hard disk space on your primary drive (C:) in order to play. Klingon Honor Guard's large levels and rich textures take up a lot of virtual memory. We recommend having150 megabytes of free hard disk space for running the game and 300 megabytes or more of free hard disk space for the editor.

DOS Compatibility mode in Windows 9x Most likely your CD-ROM is using an old MS-DOS driver that prevents it from reading windows95 long style filenames. From your task bar, click on Start / Settings / Control Panel /System / Performance: If the CD-ROM drive is shown as ""Using MS-DOS compatibility"", then this is the problem. To fix it: you need to obtain and updated Windows 95 driver from your CD-ROM manufacturer.

System Requirements

Minimum system requirement: 166 MHz MMX Pentium class computer with 3D hardware acceleration. or 233 MHz Pentium for software only rendering. Windows 95 or Windows 98 32 megabytes of RAM. 2 megabyte PCI video card. Quad Speed CD ROM Hard Drive (250 MB free) Mouse DirectX compatible sound card Recommended system: 266 MHz Pentium II or faster 64 megabytes of RAM. A3D enabled sound card Hardware 3D graphics accelerator (3Dfx Voodoo or NEC PowerVR chipset required) Required for MultiPlayer Option: Local area network with TCP/IP protocol Internet play requires a true TCP/IP connection

Multiplayer

When a new player enters a network game, clients may experience a 1/4-second pause while the mesh, skin, and other data is loaded for that player.

To fein death in multiplayer simply type feigndeath at the console. This is also bound to the f key by default.

To maintain a consistent frame rate despite a large number of translucent surfaces and/or explosion effects in software rendering, you might want to set ""SlowVideoBuffering"" to ""True"" in the ""Advanced Options/Display"" menu. This is especially helpful in Multi-player games.

There is an option to launch a dedicated server from the Klingon Honor Guard Start menu. You can also launch a dedicated server from the command line for more control over gameplay options.

If your computer is on a local area network, you can simply start a game from the multiplayer menu, and other players on your network can join in using the Join command in the Multiplayer menu. If you want to play over the Internet, have an active TCP/IP connection running. In other words: you must be connected to the Internet. Then, to start a game: select Start in the multiplayer menu and give out your IP address to other players so that they can join the game. An easy way to find your IP address is to click on Start then on Run, then type in winipcfg and press Enter. Your IP address should be listed under ppp adapter. To join an Internet game: from the multiplayer menu, type in the IP address of the game you wish to join and then press Enter or, enter the IP address into the favorites list for future games.

Klingon Honor guard work better using a keypad or the keyboard. If you'd rather use a Joystick, you need to turn the option ON from the advanced settings: Go to the advanced options menu then expand the Display selection. Locate the 'Use Joystick' True/False drop box and choose TRUE Unfortunately this default setting was not changed from the original release of Unreal. Here's also some useful information on how to make your character turn instead of strafe: This is explained in the UNREAL troubleshooting guide as follows: Joystick: If you want the left-right controls to make you rotate (rather than strafe), go to Options / Advanced Options / Advanced / Raw Key Bindings, scroll down to ""JoyX"", and change the text there from ""Axis aStrafe speed=2"" to ""Axis aTurn speed=2"".

To taunt your enemies in a multi-player game type taunt at the console. This can also be bound to a key in the advanced options under the raw key bindings section.

Unreal Internet play performance is highly dependent on the bandwidth of your connection, latency or ping time, and packet loss. The game is designed to be playable up to 300 millisecond ping times, 5% packet loss, and 28.8K connection speeds. Game performance degrades heavily under worse latency, packet loss, and bandwidth connections.

Minimum 28.8 The minimum speed connection for acceptable Internet play performance is a 28.8K modem connection to your Internet Service Provider.

Video

To maintain a consistent frame rate despite a large number of translucent surfaces and/or explosion effects in software rendering, you might want to set ""SlowVideoBuffering"" to ""True"" in the ""Advanced Options/Display"" menu. This is especially helpful in Multi-player games.

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base From the ""Advanced Options"" menu: Open up the ""Drivers"" tab change the ""Game Render Device"" to match the type of card you have. If you do not have a 3D accelerator, leave this option ""Software Rendering"" selected. Direct Draw drivers Some older DirectDraw drivers do not support low resolution 16 and 32-bit color modes. If the only full-screen options shown in Klingon Honor Guard is high-res, you might try obtaining a newer DirectDraw driver for your video card. If you have not already done so, try installing DirectX 5.0 from the Klingon Honor Guard CD. If you still encounter problems: contact your computer or video card manufacturer for the latest DirectX drivers for your card.

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base From the ""Advanced Options"" menu: Open up the ""Drivers"" tab change the ""Game Render Device"" to match the type of card you have. If you do not have a 3D accelerator, leave this option ""Software Rendering"" selected.

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base

The present Glide rivers for the Voodoo III do not work with the Voodoo II, but you they do support Direct3D. Here's what to do. Using notepad, open the file KHG.INI (in the folder to which you have installed KHG - the default is \Microprose\khg) and replace [Engine.Engine] GameRenderDevice=GlideDrv.GlideRenderDevice With =SoftDrv.SoftwareRenderDevice

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base Unreal patches will not work for Klingon Honor Guard: NO. The Unreal patches will not work for Klingon Honor Guard. You need to get the Klingon Honor Guard patch version 1.1 Click on the link(s) below to obtain the appropriate update file: Get the KHG patch version 1.1 (approx 2.3 MB) Read the release Notes for Klingon Honor Guard version 1.1

First: Go to Display Properties in your control panels and make sure you are set for 16 bit color, NOT 32 bit. Next thing to do please is to install the patch from the link below. Next: Update your driver. Banshee owners need to use the drivers from 3DFX's web site. Some of the video board manufacturers have not incorporated the latest drivers on their web sites. please follow the instructions on how to install those new drivers. (When you get the driver page at 3DFX, go to USA, then Downloads, Voodoo Banshee Drivers, scroll down past the listing of board manufacturers and get the 3DFX Available Runtime drivers. Pick Win 95 or 98, (9x means both), and choose PCI or AGP whichever type your board is - as of Jan 99 3dfx site might change the listing at a later date). To get a fresh start for all of your Advanced Options settings, move the Klingon.ini file (or KHG.ini if the game is patched) in the Khg / System folder to another place and let the game try and make a new one when you start the game again. The game should create a new ini file as if you were playing for the first time. This will allow you to tell the game you are using a 3DFX card because it always asks you that question the first time the game is played. (This works on most systems, if this doesn't work then put the ini file back in the game's system folder where you found it.) Further Information: Get the KHG patch version 1.1 (approx 2.3 MB ) Read the release Notes for Klingon Honor Guard version 1.1 VISIT the 3Dfx site for the latest reference drivers

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base

Currently, we do not have a fix for this problem. The best way to avoid this problem is to stick with one rendering option.

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base

Hit the TAB key and type in FLUSH. Your problem should clear up.

During gameplay: Press the ENTER key on your keyboard while holding down the ALT key. The game should instantly switch to full screen mode. Or, you can pick a full screen mode directly from the Advanced Options menu.

If you are running is software mode and the game is too dark, go into Options / Advanced Options / Display / and set NoLighting to True. Also the F11 key will change brightness during gameplay.

Some machines cannot play the AVI mission briefings properly when set higher than 16-bit color. Playing the AVIs will cause the game to exit and display an error message. Please update your DirectDraw display drivers to try and resolve this issue. If that does not work then you will have to set your desktop resolution to 16-bit color.

Some video drivers do not properly support DirectDraw full-screen mode in 16- or 32-bit color at any resolution. Try installing DirectX 5 from the CD. If this does not work, you can try to obtain the latest DirectX driver update for your card from your computer or video card manufacturer.

Klingon Honor Guard runs in video modes that your monitor might never have used before. Just use the controls on your monitor to set the size, centering, and geometry of the picture. This will not change the settings for any of your other video modes and you should only have to do it once.

Here are the exact 3DFX downloading instructions. (5/1/99) If during installation Windows warns you that the file you are loading is older than the one on your computer, load the file anyway even though it is older, it will work. Voodoo2/ 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo2 5. Scroll past the listing of boards 6. Click on Voodoo2 Windows 95/98 Reference Drivers 7. Download Voodoo2 drivers V3.01.01 8. Expand file into a folder and follow the Readme instructions inside the folder. Voodoo (original) 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Graphics 5. Scroll past the listing of boards 6. Click on Voodoo Graphics Windows 95/98 Reference Drivers 7. Download rkvg.exe 8. Expand file into a folder and follow the Readme instructions inside Voodoo Banshee 1. Go to http://www.3dfx.com 2. Go to USA 3. Go to Drivers 4. Go to Voodoo Banshee 5. Scroll past the listing of boards 6. Download the appropriate Voodoo Banshee Reference drivers 7. Expand file into a folder and follow the Readme instructions inside the folder Latest additions to the knowledge base